Description
Feature:
- REVERSE OSMOSIS WATER FILTRATION: The Watts Premier RO Pure Reverse Osmosis System was designed with you in mind. With a space saving, compact design that allows the system to fit under your sink with minimal space requirements. It gives crystal clear, high quality and great tasting water.
- RO WATER FILTER: Changing the filters in this RO System is as easy as pushing a button, eliminating the mess and difficulty associated with filter changes! No need to shut off the water before changing the filters! There are check valves installed in each filter lid that will close the water flow when cartridges are removed. Maximum operating Pressure: 100 psi
- EASY TO INSTALL: Watts Premier’s Reverse Osmosis home water treatment systems are easy to install. All components are an integral part of the unit, requiring fewer tube connections, Back-flow prevention valves are installed between the elements. Cartridges have double o-rings so they won’t leak.
- FOUR STAGE WATER FILTRATION: The RO Pure Reverse Osmosis System consists of 4-Stages of filtration. Stage 1 – Sediment Pre-Filter (105311), Stage 2 – Carbon Pre-Filter (105351), Stage 3 – 50 GPD Membrane (105331) Stage 4 – Carbon Post-Filter (105341), giving you crystal clear, high quality and great tasting drinking water.
- BEST QUALITY WATER FILTER: Includes a Chrome, Monitored, Top Mount, Air-Gap Faucet and 3 gallon storage tank. Filters change out at the push of a button. This system is certified by WQA to NSF/ANSI 372 Lead Free and Certified to NSF/ANSI 58 Certified Reverse Osmosis Units.
- See attached installation manual in the Technical Details section
- See Technical Specification section for more information about the product
The RO Pure Reverse Osmosis System consists of four separate stages. Stage #1 – Five Micron Sediment Pre-Filter that traps particulate matter like dirt, rust, and silt that will affect the taste and appearance of your water. Stage #2 – Five Micron Carbon Block Pre-Filter that helps ensure a greater reduction of chlorine and other materials that cause bad taste and odors. (The first two stages are called Pre-Filters because they filter in front of the Reverse Osmosis Membrane). Stage #3 – The 50 GPD Membrane is the heart of the Reverse Osmosis System. This semi-permeable membrane will effectively reduce TDS (total dissolved solids), Sodium and a wide range of contaminants such as Lead, Percolate, Chromium, Copper and Radium. It will also remove over 99.95% cysts such as Giardia and Cryptosporidium. Stage #4 – Five Micron Carbon Post-Filter (105341) which is used as a final polishing filter. It is important that this system is properly installed and maintained with an incoming water pressure of 40 to 80 psi for it to operate as designed. The filtered water passes through the membrane and enters the storage tank. When you’re ready for a taste, it will leave the storage tank and pass through the fourth stage on its way up to the faucet. The end result? Crystal clear, high quality, and great tasting water! In the Box: RO Pure Reverse Osmosis module (pre-installed filters), Parts Bag, 3 Gallon Storage tank, Faucet, and installation instructions (manual).
